When setting up two channels to subgroup 1, placing a stereo delay in AUX1 FX, then change the AUX 1 level to the mid, then fading down the SUB down to infinty, there's still delay to hear, but it shouldnt. When moving the AUX1 level, the delay disappears.
Seems that the send level AUX 1 is pre-fader not postfader. ?
Cheers, Stephan Möller
reproducable BUG in Auria
Re: reproducable BUG in Auria
Stephan,
Thanks. When you mention using the AUX1 send, is this the send knob on the Subgroup, or on the channel?
Thanks,
Rim
Thanks. When you mention using the AUX1 send, is this the send knob on the Subgroup, or on the channel?
Thanks,
Rim
-
- New Member
- Posts: 2
- Joined: Mon Dec 10, 2012 5:29 am
Re: reproducable BUG in Auria
the aux is on the subgroup channel
Re: reproducable BUG in Auria
OK, thank you, I'll look at this.
Rim
Rim
Re: reproducable BUG in Auria
OK, I think I know what might be happening in your case: please check if you have the AUX1 knob set in your channel also. In other words, on the track 1, for example, not the subgroup. There are two possible places to send to the aux bus.
Rim
Rim
Who is online
Users browsing this forum: No registered users and 7 guests