Bus strip, Aux and inserts doesn't work on latest Auria Pro
Bus strip, Aux and inserts doesn't work on latest Auria Pro
I'm working on two projects, one is newly made on the latest version one is from the previous version.
I've noticed that only bus nr. 1 is working, thus the bus compressor, inserts and Aux. The other busses are "dead" and only respond to volume changes. The bus compressor on busses 2,3,4, etc is not reacting when switched on. Same goes to inserts or Aux applied to these busses.
I'm using iPad Air2
I've noticed that only bus nr. 1 is working, thus the bus compressor, inserts and Aux. The other busses are "dead" and only respond to volume changes. The bus compressor on busses 2,3,4, etc is not reacting when switched on. Same goes to inserts or Aux applied to these busses.
I'm using iPad Air2
-
- Expert
- Posts: 29
- Joined: Sun Jun 07, 2015 11:44 pm
Re: Bus strip, Aux and inserts doesn't work on latest Auria
I can also confirm this issue.
Surprised that nobody has replied to this post yet.
FWIW - Using the latest version of Auria Pro under iOS 10 on an Air 2. Exact same issue as in the post above.
Can anybody else confirm or deny this?
EDIT - Loading an older project (one from iOS 9) and then loading one of my newer projects seems to fix this for me. The eq and dynamics on the subgroups are behaving as they should now. Would still love to know if anybody else experienced this...
@Duke21 - give the above a try and let me know if it worked for you as well.
Surprised that nobody has replied to this post yet.
FWIW - Using the latest version of Auria Pro under iOS 10 on an Air 2. Exact same issue as in the post above.
Can anybody else confirm or deny this?
EDIT - Loading an older project (one from iOS 9) and then loading one of my newer projects seems to fix this for me. The eq and dynamics on the subgroups are behaving as they should now. Would still love to know if anybody else experienced this...
@Duke21 - give the above a try and let me know if it worked for you as well.
iPad Air 2 64, Scarlett 18i8, Auria, etc.
Re: Bus strip, Aux and inserts doesn't work on latest Auria
I can't get this to happen at all no matter which way I try it. I'm either missing something or the problem only occurs due to a very niche situation.
@Duke21 can you give me your step by step process, or shoot a quick vid on your phone?
@Duke21 can you give me your step by step process, or shoot a quick vid on your phone?
-
- Expert
- Posts: 74
- Joined: Fri Oct 26, 2012 12:56 pm
Re: Bus strip, Aux and inserts doesn't work on latest Auria
I am having the same Issue: on the busses 1-8 none of the inserts are working,no matter what type (FF,PSP or whatever).
Neither do the channelstrip EQ or Dynamics on these busses.The only thing that works on the busses are the volume
faders.
iPadPro,latest AuriaPro,latest iOS,50 GB free space.
Neither do the channelstrip EQ or Dynamics on these busses.The only thing that works on the busses are the volume
faders.
iPadPro,latest AuriaPro,latest iOS,50 GB free space.
Re: Bus strip, Aux and inserts doesn't work on latest Auria
We can't duplicate this here at all. Busses are working normally here. Are you sure you're talking about buses, and not subgroups or something else?
Please give a step by step example of what you do to make this happen. In other words, starting from a blank project with no tracks, tell us exactly what you're doing.
Thanks,
Rim
Please give a step by step example of what you do to make this happen. In other words, starting from a blank project with no tracks, tell us exactly what you're doing.
Thanks,
Rim
-
- Expert
- Posts: 74
- Joined: Fri Oct 26, 2012 12:56 pm
Re: Bus strip, Aux and inserts doesn't work on latest Auria
I'm sorry - my fault: I was talking about SUBGROUPS!Everything is working fine on Subgroup 1( inserts,channeleq etc.).
But on subgroups 2-8 only the volume faders work ok.No matter what I put in the inserts,the plugins show up but they
don't work.This is on a "regular" project with a couple of imported tracks (16bit), one Audiobus-recorded (24bit) and
a couple of timestretched regions (32bit).As I said above,everything is fine on subgroup1, but not on subgroups 2-8.
Thank you for your constant patience and support!
But on subgroups 2-8 only the volume faders work ok.No matter what I put in the inserts,the plugins show up but they
don't work.This is on a "regular" project with a couple of imported tracks (16bit), one Audiobus-recorded (24bit) and
a couple of timestretched regions (32bit).As I said above,everything is fine on subgroup1, but not on subgroups 2-8.
Thank you for your constant patience and support!
Re: Bus strip, Aux and inserts doesn't work on latest Auria
Ah OK, subgroups! Yes, I can confirm the issue you're seeing. It seems to be a bug in 64 bit mixer mode. If you go into your settings and turn off 64 bit mixer mode, the problem will go away. I've added this to my list.
Thanks,
Rim
Thanks,
Rim
-
- Expert
- Posts: 74
- Joined: Fri Oct 26, 2012 12:56 pm
Re: Bus strip, Aux and inserts doesn't work on latest Auria
@Rim: :Great,thank you!
Re: Bus strip, Aux and inserts doesn't work on latest Auria
Hello,
Sorry for not answering your question Corey W. I've posted it and nobody posted anything about it so I didn't followed it for a while. My bad, I've meant subgroups and not bus..
Yes, the mixer was set on 64bit, turned 64bit off and the subgroup are back working!
Sorry for not answering your question Corey W. I've posted it and nobody posted anything about it so I didn't followed it for a while. My bad, I've meant subgroups and not bus..
Yes, the mixer was set on 64bit, turned 64bit off and the subgroup are back working!
Who is online
Users browsing this forum: No registered users and 4 guests