Today’s release of iOS 14.3 beta two has fix this problem! Thank God!
Official iOS 14 bug thread
Re: Official iOS 14 bug thread
Re: Official iOS 14 bug thread
Today’s release of iOS 14.3 beta two has fix this problem! Thank God!
Re: Official iOS 14 bug thread
Don't know if this is a IOS 14 specific bug, but I can't remember encountering it before ...
iPad Pro 10.5 w IOS 14.2
Apogee One w the Maestro App.
Seems like the 'Play' button stops working when switching between Auria and Maestro ...
#1 : Open Maestro & select Externac mic w 48V and set level
#2 : Open Auria & create new project and record some tracks.
#3 : Switch back to Maestro to turn off Phantom power
#4 : Switch back to Auria and ... Everything else seems to work ! Forward, Reverse, double tappnig the 'Stop' button works as expected ...
But 'Play' doesn't do anything ... Have to re-start Auria.
?
iPad Pro 10.5 w IOS 14.2
Apogee One w the Maestro App.
Seems like the 'Play' button stops working when switching between Auria and Maestro ...
#1 : Open Maestro & select Externac mic w 48V and set level
#2 : Open Auria & create new project and record some tracks.
#3 : Switch back to Maestro to turn off Phantom power
#4 : Switch back to Auria and ... Everything else seems to work ! Forward, Reverse, double tappnig the 'Stop' button works as expected ...
But 'Play' doesn't do anything ... Have to re-start Auria.
?
Re: Official iOS 14 bug thread
This ‘bug’ still annoys me ...
I have to close down and re-open Auria every time I switch to Apogee Maestro to change some settings ...
And it’s only the ‘Play’ button that ‘falls out’ ...
Anyone else use Maestro ?
I have to close down and re-open Auria every time I switch to Apogee Maestro to change some settings ...
And it’s only the ‘Play’ button that ‘falls out’ ...
Anyone else use Maestro ?
jussishow wrote: ↑Sat Nov 21, 2020 12:47 pmDon't know if this is a IOS 14 specific bug, but I can't remember encountering it before ...
iPad Pro 10.5 w IOS 14.2
Apogee One w the Maestro App.
Seems like the 'Play' button stops working when switching between Auria and Maestro ...
#1 : Open Maestro & select Externac mic w 48V and set level
#2 : Open Auria & create new project and record some tracks.
#3 : Switch back to Maestro to turn off Phantom power
#4 : Switch back to Auria and ... Everything else seems to work ! Forward, Reverse, double tappnig the 'Stop' button works as expected ...
But 'Play' doesn't do anything ... Have to re-start Auria.
?
Re: Official iOS 14 bug thread
This bug has been present for some time now, but there’s a simple workaround:jussishow wrote: ↑Sat Jan 09, 2021 12:51 pmThis ‘bug’ still annoys me ...
I have to close down and re-open Auria every time I switch to Apogee Maestro to change some settings ...
And it’s only the ‘Play’ button that ‘falls out’ ...
Anyone else use Maestro ?
jussishow wrote: ↑Sat Nov 21, 2020 12:47 pmDon't know if this is a IOS 14 specific bug, but I can't remember encountering it before ...
iPad Pro 10.5 w IOS 14.2
Apogee One w the Maestro App.
Seems like the 'Play' button stops working when switching between Auria and Maestro ...
#1 : Open Maestro & select Externac mic w 48V and set level
#2 : Open Auria & create new project and record some tracks.
#3 : Switch back to Maestro to turn off Phantom power
#4 : Switch back to Auria and ... Everything else seems to work ! Forward, Reverse, double tappnig the 'Stop' button works as expected ...
But 'Play' doesn't do anything ... Have to re-start Auria.
?
-Minimize Auria Pro (press home button or swipe up, depending on your device model) and open it again. The Play button will work fine now.
Rodolfo
Re: Official iOS 14 bug thread
Thanks !
Found a post under 'General Discussion' where it was mentioned now ... Should've searched all the forum, not just under Bug Reports !![Wink ;-)](./images/smilies/icon_e_wink.gif)
Fingers crossed it's on the 'to be fixed' list !
Found a post under 'General Discussion' where it was mentioned now ... Should've searched all the forum, not just under Bug Reports !
![Wink ;-)](./images/smilies/icon_e_wink.gif)
Fingers crossed it's on the 'to be fixed' list !
Re: Official iOS 14 bug thread
Changing record level still does not work.
iPadOS 14.3
Auria Pro 2.29
iPad Pro 10.5
SPL Crimson v2
iPadOS 14.3
Auria Pro 2.29
iPad Pro 10.5
SPL Crimson v2
Re: Official iOS 14 bug thread
@Timo,
You should only be using the Mic Gain on your SPL interface. You do not need the software record gain in Auria.
You should only be using the Mic Gain on your SPL interface. You do not need the software record gain in Auria.
Re: Official iOS 14 bug thread
Corey,
Thanks for your response.
I know how to do the gain staging. But if I want to adjust gain the way that SPL states on the manual (touching -6 dbfs/ +9 dBu on the converter occasionally) then channel meter on Auria is hitting happily on red half of the time. This is because I can´t adjust record level from Auria to match the converter anymore. It was still working on Auria 2.24. After that not.
All the best,
Timo
Thanks for your response.
I know how to do the gain staging. But if I want to adjust gain the way that SPL states on the manual (touching -6 dbfs/ +9 dBu on the converter occasionally) then channel meter on Auria is hitting happily on red half of the time. This is because I can´t adjust record level from Auria to match the converter anymore. It was still working on Auria 2.24. After that not.
All the best,
Timo
Re: Official iOS 14 bug thread
I have the lastest IOS installed on a an iPad Air (2020 model). I'm using a Motu M2 interface and running a 48k sample rate project. I'm using the non-pro version of Auria.
- I can't get to the the master strip FX button. It's either covered up by the CPU meter or, I disable the meter in settings and can no longer get to the master bus at all. In the latter situation, I can scroll to it momentarily but it won't stay when I release my finger.
- I plug in a usb-c-to-headphone adapter (not lightning) and get the prompt saying I should plug the device in before or after startup. Whichever, it's irrelevant because I've tried it both ways. I have to hit 'OK' several times to get past the prompt.
- I get the crash report prompt every time I start up the app. I haven't figured out another way to shut the app down besides the standard IOS method, but Auria apparently thinks that's a crash.
- I can't get to the the master strip FX button. It's either covered up by the CPU meter or, I disable the meter in settings and can no longer get to the master bus at all. In the latter situation, I can scroll to it momentarily but it won't stay when I release my finger.
- I plug in a usb-c-to-headphone adapter (not lightning) and get the prompt saying I should plug the device in before or after startup. Whichever, it's irrelevant because I've tried it both ways. I have to hit 'OK' several times to get past the prompt.
- I get the crash report prompt every time I start up the app. I haven't figured out another way to shut the app down besides the standard IOS method, but Auria apparently thinks that's a crash.
-
- Expert
- Posts: 588
- Joined: Tue Nov 20, 2018 2:56 pm
Re: Official iOS 14 bug thread
Fwiw, that panel about plugging in gne headphones is bug triggered by almost any audio interface and is seemingly unavoidable.Sabicas wrote: ↑Thu Mar 25, 2021 3:27 pmI have the lastest IOS installed on a an iPad Air (2020 model). I'm using a Motu M2 interface and running a 48k sample rate project. I'm using the non-pro version of Auria.
- I can't get to the the master strip FX button. It's either covered up by the CPU meter or, I disable the meter in settings and can no longer get to the master bus at all. In the latter situation, I can scroll to it momentarily but it won't stay when I release my finger.
- I plug in a usb-c-to-headphone adapter (not lightning) and get the prompt saying I should plug the device in before or after startup. Whichever, it's irrelevant because I've tried it both ways. I have to hit 'OK' several times to get past the prompt.
- I get the crash report prompt every time I start up the app. I haven't figured out another way to shut the app down besides the standard IOS method, but Auria apparently thinks that's a crash.
Re: Official iOS 14 bug thread
Understood.Espiegel123 wrote: ↑Thu Mar 25, 2021 3:33 pmFwiw, that panel about plugging in gne headphones is bug triggered by almost any audio interface and is seemingly unavoidable.Sabicas wrote: ↑Thu Mar 25, 2021 3:27 pmI have the lastest IOS installed on a an iPad Air (2020 model). I'm using a Motu M2 interface and running a 48k sample rate project. I'm using the non-pro version of Auria.
- I can't get to the the master strip FX button. It's either covered up by the CPU meter or, I disable the meter in settings and can no longer get to the master bus at all. In the latter situation, I can scroll to it momentarily but it won't stay when I release my finger.
- I plug in a usb-c-to-headphone adapter (not lightning) and get the prompt saying I should plug the device in before or after startup. Whichever, it's irrelevant because I've tried it both ways. I have to hit 'OK' several times to get past the prompt.
- I get the crash report prompt every time I start up the app. I haven't figured out another way to shut the app down besides the standard IOS method, but Auria apparently thinks that's a crash.
How do I work around the first bug I reported, where I can't get to the master strip FX button? How else would I apply something like a "tape" effect to the entire mix?
-
- Expert
- Posts: 588
- Joined: Tue Nov 20, 2018 2:56 pm
Re: Official iOS 14 bug thread
No, idea. But, I think you should post that particular bug as a new topic to see if you can get Rim or Corey's attention -- and send an email to their support address as well -- you might also want to post a video demonstrating it. I don't have that issue on my 9.7" iPad (running iOS 13.7). So, I don't know what workaround there might be.Sabicas wrote: ↑Fri Mar 26, 2021 2:12 pmUnderstood.Espiegel123 wrote: ↑Thu Mar 25, 2021 3:33 pmFwiw, that panel about plugging in gne headphones is bug triggered by almost any audio interface and is seemingly unavoidable.Sabicas wrote: ↑Thu Mar 25, 2021 3:27 pmI have the lastest IOS installed on a an iPad Air (2020 model). I'm using a Motu M2 interface and running a 48k sample rate project. I'm using the non-pro version of Auria.
- I can't get to the the master strip FX button. It's either covered up by the CPU meter or, I disable the meter in settings and can no longer get to the master bus at all. In the latter situation, I can scroll to it momentarily but it won't stay when I release my finger.
- I plug in a usb-c-to-headphone adapter (not lightning) and get the prompt saying I should plug the device in before or after startup. Whichever, it's irrelevant because I've tried it both ways. I have to hit 'OK' several times to get past the prompt.
- I get the crash report prompt every time I start up the app. I haven't figured out another way to shut the app down besides the standard IOS method, but Auria apparently thinks that's a crash.
How do I work around the first bug I reported, where I can't get to the master strip FX button? How else would I apply something like a "tape" effect to the entire mix?
Does anything change if you add new channel strips? (I wonder if changing the mixer's width might result in it recalculating the mixer width).
Re: Official iOS 14 bug thread
I just sent them a screen-capture-video. I did just figure out a workaround though. If I tap over in the black border, I can access the FX button and control the fader.Espiegel123 wrote: ↑Fri Mar 26, 2021 3:10 pmNo, idea. But, I think you should post that particular bug as a new topic to see if you can get Rim or Corey's attention -- and send an email to their support address as well -- you might also want to post a video demonstrating it. I don't have that issue on my 9.7" iPad (running iOS 13.7). So, I don't know what workaround there might be.Sabicas wrote: ↑Fri Mar 26, 2021 2:12 pmUnderstood.Espiegel123 wrote: ↑Thu Mar 25, 2021 3:33 pm
Fwiw, that panel about plugging in gne headphones is bug triggered by almost any audio interface and is seemingly unavoidable.
How do I work around the first bug I reported, where I can't get to the master strip FX button? How else would I apply something like a "tape" effect to the entire mix?
Does anything change if you add new channel strips? (I wonder if changing the mixer's width might result in it recalculating the mixer width).
I found this while searching for the bug resolution, yesterday. I'll post my workaround.
https://www.auriaapp.com/forum/viewtopic.php?t=15878
-
- Expert
- Posts: 588
- Joined: Tue Nov 20, 2018 2:56 pm
Re: Official iOS 14 bug thread
Is anyone getting Auria Pro to work with Audiobus 3 in iOS 14?
It works for me on iOS 13.7 but someone is not able to get it to work on iOS 14 over on the Audiobus forum -- due to Auria not implementing the Network Permissions that iOS 14 added.
It works for me on iOS 13.7 but someone is not able to get it to work on iOS 14 over on the Audiobus forum -- due to Auria not implementing the Network Permissions that iOS 14 added.
Who is online
Users browsing this forum: No registered users and 81 guests