The Working / Not working audio interfaces thread
Re: Recording with Focusrite Scarlett 18i6
Hello,
Yes--the Focusrite has 2 XLR inputs and 6 TRS line inputs. All 8 (and even 8 more when using ADAT) of these can be routed and recorded to individual tracks within Auria. Simply connect the interface to the iPad using the Camera Connection Kit, and all available inputs will show up in the Input Matrix.
Best,
Chris
WaveMachine Labs
Yes--the Focusrite has 2 XLR inputs and 6 TRS line inputs. All 8 (and even 8 more when using ADAT) of these can be routed and recorded to individual tracks within Auria. Simply connect the interface to the iPad using the Camera Connection Kit, and all available inputs will show up in the Input Matrix.
Best,
Chris
WaveMachine Labs
Re: Recording with Focusrite Scarlett 18i6
Hi Chris, thanks for the info but if when i'm finished using 6 tracks and want to record more would Auria recognize the six outputs which i just used from focusrite as new tracks if i already mapped the first six tracks i recorded in the matrix in Auria? (hope i'm not confusing you). what i basically want to know is can i continuously add more tracks and constantly be able to map each track to a separate channel in the matrix in Auria or am i limited to only mapping six tracks to six separate channels in Auria seeing that Focusrite only has six RS line inputs.
Re: Recording with Focusrite Scarlett 18i6
Hello,
Yes, you can record onto new channels by reassigning the inputs in the Input Matrix.
Best,
Chris
WaveMachine Labs
Yes, you can record onto new channels by reassigning the inputs in the Input Matrix.
Best,
Chris
WaveMachine Labs
Re: Tascam US-800: Not available. How about US-600 ??
Thanks for the replies guys! Will steer away from the Tascam units. Will check out the Focusrite and will look into the Lexicon. I have a Pro Tools setup...just looking for a decent little mobile option...something small that doesn't have to be rack mounted. Actually considering the little Alesis Dock I/O despite all the hell it received during the last iOS update. Again, great feedback on the Tascam stuff...'preciate it. --R
-
- Member
- Posts: 19
- Joined: Wed Jul 18, 2012 2:42 pm
M-audio Fast Track C400 compatibility
Hi, is the M-Audio Fast Track C400 compatible with Auria? (with cckit +
Powered USB hub?)
Powered USB hub?)
Re: M-audio Fast Track C400 compatibility
Hello,
We have not had the opportunity to test the C400, so we cannot say whether it is compatible. If there is information suggesting that it is class compliant (works without a driver) then there is a chance that it is, but we have not been able to find any confirming this.
Best,
Chris Miller
WaveMachine Labs
We have not had the opportunity to test the C400, so we cannot say whether it is compatible. If there is information suggesting that it is class compliant (works without a driver) then there is a chance that it is, but we have not been able to find any confirming this.
Best,
Chris Miller
WaveMachine Labs
-
- Member
- Posts: 19
- Joined: Wed Jul 18, 2012 2:42 pm
Re: M-audio Fast Track C400 compatibility
Thanks, tomorrow I will go and test it at the shop... I will post the results.
Re: M-audio Fast Track C400 compatibility
I tested the C600 and it did not work. The box requires drivers.....
-
- Expert
- Posts: 31
- Joined: Wed Jul 18, 2012 4:36 pm
RME Babyface ???
Hello,
just found this APP.... WOW!!!!
I assume being RME & midi it will work with Auria ??
thanks
jim
just found this APP.... WOW!!!!
I assume being RME & midi it will work with Auria ??
thanks
jim
-
- Member
- Posts: 19
- Joined: Wed Jul 18, 2012 2:42 pm
Re: M-audio Fast Track C400 compatibility
Oh so i assume that C400 will not work too. Same "core", different number of I/O. However tomorrow i will verify at the shop.
Damn, if only the Apogee Jam had 2 INPUTS.......
Damn, if only the Apogee Jam had 2 INPUTS.......
-
- Member
- Posts: 19
- Joined: Wed Jul 18, 2012 2:42 pm
The Working / Not working audio interfaces thread
I think it may be useful to synthesize in a thread which audio interfaces work with Auria and which don't, so a simple "FIND" in this thread may be friend of many users.
- M-Audio Fast Track ----> [DOES NOT WORK]
- Digidesign MBOX ----> [DOES NOT WORK]
- Lexicon Omega ----> [DOES WORK WITH CAMERA CONNECTION KIT WITHOUT POWERED HUB]
- M-Audio Fast Track ----> [DOES NOT WORK]
- Digidesign MBOX ----> [DOES NOT WORK]
- Lexicon Omega ----> [DOES WORK WITH CAMERA CONNECTION KIT WITHOUT POWERED HUB]
Re: The Working / Not working audio interfaces thread
- Edirol UA-1000 (hub or not) ----> [DOES NOT WORK]
Re: The Working / Not working audio interfaces thread
Good idea. We'll add them to our list.
Any interface which works on a mac without any drivers should work on an iPad.
Any interface which works on an iPad will work in Auria.
Almost any 2-channel interface will work (except digidesign interfaces)
Thanks,
Rim
Any interface which works on a mac without any drivers should work on an iPad.
Any interface which works on an iPad will work in Auria.
Almost any 2-channel interface will work (except digidesign interfaces)
Thanks,
Rim
Re: RME Babyface ???
From what I understand, you need a class compliant interface in order to connect to ipad. Unfortunately, the babyface is not that. Hopefully rme releases the necessary driver in order for this to happen. I have a babyface as well but am using the alesis io dock in the meantime.
Elepha3
Elepha3
Who is online
Users browsing this forum: Bing [Bot] and 17 guests